All-in-One Infrared Amplifier
IR-5000M
2×150W output, interference-immune infrared transmission, dual microphone channels and Cat5e RJ45 runs. Built for meeting rooms, classrooms and high-end multi-function halls.
Lossless Infrared Transmission
Audio travels on infrared light with automatic switching between 2.06MHz and 2.56MHz, so devices sharing a room never interfere. Confidential, immune to electromagnetic noise, and quiet in the truest sense.
No radiation · Eco-friendlyRJ45 Sensor Expansion
A standard RJ45 interface carries the signal up to 100 metres and accepts four infrared sensors through the dedicated T-adapter, covering large rooms with simple cabling.
Easy install · Stable linkProfessional Preamplifier
Two balanced microphone inputs with 48V phantom power and two balanced line inputs, each with independent level control. On-board DSP suppresses howling while keeping the sound full and undistorted.
Feedback control · Smart mixingComplete Interface Matrix
USB recording, Type-C audio, Bluetooth 5.0, RS232 control, PPT page-turn expansion and two power outlets cover the demands of complex installations.
One unit, many roles- Class-D amplification with wide-voltage PFC supply — efficiency up to 90%, very little heat, and stable operation from AC 100 to 260V anywhere in the world.
- Switchable output modes — 2×150W into 4–8Ω or 4×75W into 8Ω, matching ceiling, wall-mount and line array loudspeakers.
- RJ45 network broadcast decoding — connects to an IP broadcast server for background music and emergency paging (optional expansion).
- USB recording and Type-C input — recordings are written straight to a USB drive, while Type-C accepts audio from a phone or laptop.
- 2.4-inch display with encoder control — status at a glance, with fast adjustment of master volume and menu settings.
- Comprehensive protection — short-circuit, DC, over-temperature and overload protection, with a speed-controlled fan for quiet cooling during 24/7 operation.
- Bluetooth 5.0 built in — a dedicated antenna port keeps wireless music playback steady for meeting and classroom background audio.
- PPT infrared page-turn expansion — a dedicated port pairs with infrared technology for latency-free slide changes.
- Independent channel levels — infrared A and B channels adjust separately with connection indicators, balancing two microphones with ease.
- Green and safe — infrared is harmless to the human body, making this a genuinely green product free of radio licensing requirements.
Simple Installation, Serious Expansion
A standard RJ45 cable carries the infrared signal up to 100 metres, and the dedicated T-adapter brings in as many as four sensors to cover large spaces without effort. Two AC outlets on the rear can power a projector or a display, simplifying rack wiring.
Interference-Free, Confidential, Intelligent Infrared Audio
The IR-5000M moves past the frequency interference of conventional wireless microphones by carrying audio on infrared light, while DSP anti-howling keeps the result clean. Built for demanding meetings, training rooms and commercial venues.
* Full infrared sound reinforcement integration, including solution design, on-site commissioning and after-sales support.